5
CHAPTER 3: Configuration
With the MultiMode FOM’s external DIP switch, you can configure the unit
for many different combinations of data rates and clocking methods for
synchronous or asynchronous applications. (Since the FOM has no internal
jumpers or other internal controls, you don’t have to open the unit’s case to
configure the unit.) Figures 3-1 and 3-2 below and Table 3-1 on the next page
show the location of the switch and the switch positions’ identities, settings,
and functions.
Figure 3-2. Closeup of the DIP switch positions showing
ON/OFF settings and position numbers.
1
ON
2 3 4 5 6 7 8
ON
OFF
Figure 3-1. The location of the DIP
switch on the underside of the unit.
1
ON
2
3
4
5
6
7
8
REAR
FRONT
3. Configuration
