Manual of VDSL2 Mini MEG101AE-R4
Page #10
http://www.black-box.eu
_____________________________________________________________________________
General Rules
Ethernet Port (RJ-45)
All network connections to the Modem Ethernet port must be made using
Category 5, 5e, 6a or 7. No more than 100 meters of cabling may be used between
the HUB or Computer.
VDSL Port (RJ-11 or Terminal Block)
All connections to the VDSL RJ-11 Port or terminal block must use 24~26 Gauge phone
wiring. We do not recommend using 28 Gauge or above phone line. The active
pins are the two middle pins 2 and 3. To have a clear setup we recommend to have the
VDSL line 1:1 straight through. So, for your notice only, this VDSL device works crossed
and straight through.
VDSL Port RJ-11 Pin out (6 pin wide, 4 pins existing, 2 pins active)
Pin#
FUNCTION
1
Unused
2
TIP
3
RING
4
Unused
Alternatively to the RJ11 Port you are welcome to use the Terminal Block. Choose to use
either or, do not use both in parallel. The Terminal Block allows you to use simple wires
without crimping a connector to it.
