4
Gathering Initial Information
Under this section are listed the information and basic definitions of terms you will need to
know before installing Optinet. Begin by reviewing the information and filling out the
following table for documentation. You will need the subsequent information:
License Key
Licenses that have been purchased with your system will ship as a license key on a card in the
Documentation & Accessories box or be delivered via email at the time of purchase. Locate this card
to enable the licenses on your system during the setup process.
License Key:
Model Number:
Serial Number:
Licensed Network Nodes:
Licensing—licensing with Optinet is based on network connections. One hundred
connections on your network will constitute 100 Network Node license. Please make sure
that the amount of licenses purchased is sufficient for the active connections present on
your network.
Model Number and Serial Number—these numbers are associated with your Optinet for
device identification and are used in conjunction with the License Key for verification of the
amount of licenses purchased.
IP Configuration
If you are unsure of the following fields, the Setup Wizard will detect available addresses and settings
within your network via DHCP. You may copy over these settings during the Setup Wizard.
Optinet (Bridge) IP address:
Subnet Mask:
Default Gateway (WAN Side) IP address:
DNS Server IP address:
Management/Auxiliary Port IP address:
The Management/Auxiliary Port IP address cannot be in any active subnet in your network.
Management/Auxiliary Port Subnet Mask:
Total Download Bandwidth (in Kbps):
Total Upload Bandwidth (in Kbps):
