20
RACKMOUNT REMOTE POWER MANAGER USER’S MANUAL
NOTE
The Plug Status screen will not display actual passwords. Instead, the
password column will display “defined” or “undefined.”
Figure 4-2. Plug Status screen—text interface.
4.3 Configuration Menus
As described in the sections that follow, the power manager’s configuration
parameters can be selected via the Web browser interface or via the text interface.
Although the Web browser and text interface provide two separate means for
selecting parameters, both interfaces allow access to essentially the same set of
parameters, and parameters selected via one interface will also apply to the other.
• Web browser interface: Click on the
Setup
button in Figure 4-1 to gain access
to the configuration menus. A row of buttons will appear along the left edge of
the screen. Click on the appropriate button to access the desired menu.
NOTES
Newly selected parameters will not be activated until you click on the
Apply button.
Click on Switch Panel to return to the main status screen.
• Text interface: Refer to the Help screen (
/H
), then type in the appropriate
command to access the desired menu. When the configuration menu appears,
type in the number or letter for the parameter that you want to define and
follow the instructions in the resulting submenu.
NOTE
To exit from a parameters menu, press the Esc key.
Rackmount Remote Power Manager
v1.41h
Site ID: (undefined)
Plug |Name
|Password
|Status
|Boot/Seq.Delay |Default
|
-------------------------------------------------------------------
1
|(undefined) |(undefined) |ON
|0.5 Secs
|ON
|
2
|(undefined) |(undefined) |ON
|0.5 Secs
|ON
|
3
|(undefined) |(undefined) |ON
|0.5 Secs
|ON
|
4
|(undefined) |(undefined) |ON
|0.5 Secs
|ON
|
“/H” for help.
RPM>
Summary of Contents for PS580A
Page 3: ......
