24
RACKMOUNT REMOTE POWER MANAGER USER’S MANUAL
NOTE
When this option is enabled, security functions are suppressed, and
users are able to access configuration menus and control plugs without
entering a password. If security is a concern and the automated mode is
required, we recommend using the IP security feature (see Section 4.3.4)
to restrict access.
• Manual switch button: This button enables and configures the default button’s
manual plug control function, but it does not affect the default button’s ability
to reset parameters to default values. (The default value is on.)
- Off: Disables the manual plug control function.
- On: Enables manual plug control. When the manual switch button is pressed
and held for three seconds, all outlets will be toggled on or off.
• Command prompt: Allows the text interface command prompt to be set to
either IPS, RPM, or NBB. (The default value is RPM.)
• Default parameters: Resets the power manager to its default settings.
4.3.2 P
LUG
P
ARAMETERS
M
ENUS
The Plug Parameters menus are used to define plug names, plug passwords, and
boot/sequence delay times for each of the power manager’s switched AC outlets.
• Web browser interface: Click on the
Setup
button to access the configuration
menus, then click on the
Plug Parameters
button. The Plug Parameters menu
will appear (Figures 4-5a and 4-5b). Once you select the appropriate menu
options, click on
Apply
to save the settings or
Cancel
to start over.
Summary of Contents for PS580A
Page 3: ......
