32
RACKMOUNT REMOTE POWER MANAGER USER’S MANUAL
• Text interface: Type
/N
and press
Enter
. The Network Parameters menu will
appear (see Figure 4-10).
Figure 4-10. Network Parameters menu—text interface.
NOTES
Although both interfaces allow configuration of the same network
parameters, for the text interface, the IP security feature is configured
via a separate submenu.
Settings for network parameters depend on the configuration of your
individual network. Contact your network administrator for appropriate
settings.
The Network Parameters menus allow the following parameters to be defined.
Except where noted, all parameters listed here are available via both the Web
browser interface and text interface.
• IP Address: Defines the IP address for the power manager. (The default value
is 192.168.168.168.)
• Subnet Mask: Defines the subnet mask for the power manager. (The default
value is 255.255.255.0.)
• Gateway Address: Defines the gateway address for the power manager. (The
default value is undefined.)
• Send MSS: Defines the maximum segment size that will be sent by the power
manager. (The default value is 536.)
• IP Security: Sets up the IP security feature. The IP Security feature is described
below.
NETWORK PARAMETERS:
1. IP Address:
207.212.30.88
2. Subnet Mask:
255.255.255.0
3. Gateway Address:
207.212.30.1
4. Send MSS:
536
5. IP Security:
MAC Address:
00-09-9b-00-90-e0
Enter Selection,
Press <ESC> to Exit…
Summary of Contents for PS580A
Page 3: ......
