35
CHAPTER 4: Configuration
NOTE
Mask #5 has priority over the other four masks. If mask #5 is set to deny
access to 255.255.255.255 (all wild cards), you will not be able to access
the Rackmount Remote Power Manager’s command mode via the
network. Access will be allowed only via a local PC or an external
modem connected to the power manager’s COM port.
When using the wild card address 255.255.255.255, make certain that at
least one higher priority mask permits access by your IP address.
4.3.5 T
ELNET
P
ARAMETERS
M
ENUS
The Telnet Parameters menus are used to enable/disable Telnet access to the
power manager’s command mode and select the TCP port for Telnet connections.
• Web browser interface: Click on the
Setup
button to access the configuration
menus, then click on the
Telnet Parameters
button to display the menu shown
in Figure 4-12. Once you select the appropriate menu options, click on
Apply
to save the settings or
Cancel
to start over.
Figure 4-12. Telnet Parameters menu—Web browser interface.
• Text interface: Type
/T
and press
Enter
. The Telnet Parameters menu will
appear (Figure 4-13).
Summary of Contents for PS580A
Page 3: ......
