37
Figure 4-14. Web Server Parameters menu—Web browser interface.
• Text Interface: Type
/W
and press
Enter
. The Web Server Parameters menu
will appear (Figure 4-15).
Figure 4-15. Web Server Parameters menu—text interface.
The Web Server Parameters menu allows you to define the following:
• Service: Enables/disables the Rackmount Remote Power Manager’s Web
server.
NOTE
When the Web server is disabled, you will not be able to communicate
via the Web browser interface. (The default value is On.)
• Port Number: Sets the TCP/IP port number. The port number can be set to
any valid number except 23; this is because 23 is the default port number that
is used for communication with the power manager via Telnet. (The default
value is 80.)
WEB SERVER:
1. Service:
On
2. Server Port #:
80
Enter Selection,
Press <ESC> to Exit…
CHAPTER 4: Configuration
Summary of Contents for PS580A
Page 3: ......
