15
15
CHAPTER 3: Configuration
5. Press the <TAB> key on your keyboard.
The Configuration menu appears on your screen and the Power
Switch is now in Configuration mode. Follow the menu to
configure the Web server of your Power Switch.
Cabinet/Office 4-Port
Version: 1.1.0.1
Commands :
Display
/DS Display the Sockets Status
Control
/SS Switch the Sockets
Configuration
/NP Network Parameters Settings
/PS Passwords Settings
/NS Device and Socket Names Settings
/SP Socket Parameters Settings
/IS IP Security Settings
/RS Restart the Device
/FS Factory Settings
/RC Reset Counters
Enter Selection
>
All commands start with the slash «/»
(ex.: type the command
/NP
to go to the
N
etwork
P
arameters
setting menu.
To display the current menu again, press <ENTER>.
To go to the previous menu and to display it, press <ESC>.
Remark:
To leave the configuration mode, type the restart command
/RS
. This is
particularly important if you want to control the power outlet later through the
serial connection.