7
7
CHAPTER 2: Connecting Power Switch
2. Connecting Power Switch
1. Connect the supplied configuration cable to an available serial port
on your computer and to the serial port of the Office/Cabinet
Power Switch.
Notes:
The serial cable provided with Office/Cabinet Power Switch is a
standard straight cable with DB9 plug / socket.
You may use any other straight serial cable. For EMC reasons, we
advise you not to use cables above 3 meters long.
2. Connect your 10BaseT cable (max. 100 meters) to the network
port.
3. To connect Office/Cabinet Power Switch to the mains, plug the
cable into a grounded socket. The Pwr LED flashes on to confirm
that power is on. If not, try another socket.