CHAPTER 1: Aluminum Distribution Racks
5
STEP 3: Final tightening. (See
Figure 1-3
.)
A. Stand the frame upright.
B. Square the unit using a level or a carpenter’s square.
C. Tighten all bolts using a socket wrench or a wrench.
Figure 1-3. Step 3: Final Tightening.
STEP 4: Secure the frame to the floor.
All frames should be bolted to the floor or to an equally stabilizing and secure surface. Determine the desired
location and secure the frame.
STEP 5: Equipment installation.
Your rack is now ready for installing equipment and panels.
Top Angle
Vertical Upright
Channel
Vertical Upright
Channel
Bolt
Bolts
Bolts
Bolt
Base Angle
