background image

2

General

Display: 

Backlit graphic LCD, 128 x

64 pixels

Operating Controls:

10-position

rotary function selector;
elastomeric keypad

Audible Alarm:

Operator

Enabled/Disabled

Compliance:

Directive 89/336/EEC

per TCF CC/KID/048/98

Supported Network Standards:

IEEE 802.3: 10BASE2, 10BASE5, 

10BASE-T, 100BASE-T4, 
100BASE-TX, 1000BASE-T;

IEEE 802.5: Token Ring 4 Mbps or 

16 Mbps;

IEEE 802.12: 100VG-AnyLAN;
ANSI X3T9.5: TP-PMD;
ATM 155 Mbps

Supported Cable Standards:

TSB-67

CAT 3, 4, and 5; TSB-95 CAT 5;
TIA Category 5e; EN50173 Class
D; ISO 11801 Class C, D; ScTP
Class C, D; AS/NZS 3080 Class C,
D; BICC Millenium; FTP 120 ohms;
JIS X 5150

Operating Temperature:

32 to 122°F

(0 to 50°C)

Storage Temperature: 

-4 to +140°F

(-20 to +60°C)

Relative Humidity: 

Up to 90%,

noncondensing

MTBF:

>50,000 hours

Size: 

9.6"H x 3.9"W x 2.5"D (24.4 x

9.9 x 6.4 cm)

Weight:

2 lb. (0.9 kg)

Power

Battery:

(8) AA alkaline batteries per

unit or (1) NiMH rechargeable
battery pack per unit

Battery Life:

8 to 10 hours

continuous use or >800 Autotests
(typical)

Low Battery Indicator:

Audible

alarm plus LCD display

Automatic Power-Down: 

2 to

30 minutes (selectable) or
disabled

AC/Mains Adapter:

12 to 15 VDC,

300 mA

Input:

120V or 230V ±15%

Output:

60 or 50 Hz

Frequency: 

12 or 14 VDC

Lithium Coin Cell (Autotest Results

Storage) Life:

2 years

Performance Modules

Performance Module inputs
withstand telco ring voltages;
175V peak, 20–60 Hz
superimposed on 56 VDC,
maximum. They also withstand
electrostatic discharges per IEC
801-2 severity level 4 (8KV
contact).

Standard:

Modular Plug (TS691 or

TS691E)

Optional:

Modular Jack (TS692)

Optional:

Coax (TS693)

Memory

Test Storage:

Storage of up to 450

Autotest results plus one Traffic
Report in each SCAN-LAN VI

Imprint:

Date on all tests

Non-Volatile Memory: 

Lithium

battery-backed memory for
setup, test results, and NVP
values

Wire Mapping (Twisted-Pair
Wiring Only)

Displays the Following Errors:

Miswired pairs, shorts, opens,
shorted pairs, crossed pairs, and
split pairs. Includes test of shield
(if present).

Traffic (Ethernet Only)

Parameters Monitored:

% Utilization, % Collisions, Peak
Traffic

Other Features:

Continuous bar

graph to display activity

Attenuation-to-Crosstalk Ratio

ACR is calculated for each pair
over the full frequency range per
test specification selected.

Serial Port

Connector:

DB9 male (pins)

PC Cable:

Null modem, DB9 female

(socket) to DB9 female (socket)
and DB25 female serial port pin
assignments

Baud Rate:

1200 to 38,400 bps

(selectable)

Format: 

8 bits, no parity, 1 stop bit,

(8N1)

Flow Control: 

X-ON/X-OFF,

Hardware (CTS/DTR), None

Cable Length

Range: 

Up to 2000 ft. (610 m) 

twisted pair

Accuracy:

Up to 1000 ft. (304.8 m): ±2 ft. 
(0.6 m) ±2% ±NVP Uncertainty;
1001 to 2000 ft. (305.1 to 609.6 m):
±2 ft. (0.6 m) ±3% ±NVP
Uncertainty

NVP (Nominal Velocity of

Propagation):

0.5 to 0.99%

Cable Fault Types:

Shorts, opens,

intermediate impedance
anomalies

Number Of Faults:

End of cable and

two intermediate anomalies

Fault Threshold:

User-defined, 4 to

10% (7% default)

Talk and Test Module

Length:

6600 ft. (2011.7 m)

Resolution:

1 ft. (0.3 m)

Length Accuracy:

Up to 1000 ft.

(304.8 m) ±2 ft. (0.6 m) ±2% IR
Uncertainty; 1001 to 6600 ft.
(305.1 m to 2011.7 m) ±2 ft. (0.6 m)
±3% IR Uncertainty

Propagation Delay:

10 to 10,000 ns

Optical Loss:

Dynamic Range:

+3 dBm to -55 dBm;

Resolution: 0.01 dB; 
Accuracy: ±0.3 dB @ -20 dBm

Operating Temperature:

32 to 122°F

(0 to 50°C)

Storage Temperature:

-4 to +140°F

(-20 to +60°C)

Humidity Tolerance:

10 to 90%,

noncondensing

Power:

Derives power from the

SCAN-LAN VI

Weight: 

5.1 oz. (144.6 g)

Specifications

Ordering Information

ITEM

CODE

SCAN-LAN VI

115-VAC....................................................................TS6000A
230-VAC .................................................................TS6000AE

Talk and Test Module................................................TS6001A
Optional Performance Modules

Modular Plug ...............................................................TS691
Modular Jack ..............................................................TS692
Coax Module................................................................TS693

FIBERoptic Kit (Performance Module and 

Light Source).............................................................TS698A

FIBERoptic Kit Performance Module......................TS696A
FIBERoptic Light Source ............................................TS697A
Battery Pack (NiMH) .....................................................TS694

Reviews: