CHAPTER 2: Introduction
7
Accessories that you will need to purchase include:
• 12-24 or 10-32 nuts/bolts
• Rear Bracket Extension Kit (RMB1–RMB5): These kits contains two rear brackets, two extensions, and two
end rails. Make sure you have the correct kit to fit the depth of your cabinet (see below).
NOTE
The following length is the depth measured between the front pole and rear pole inside
a rack cabinet, not the outside depth of a rack cabinet enclosure.
Depth
RMB1
RMB2
RMB3
RMB4
RMB5
inch
cm
inch
cm
inch
cm
inch
cm
inch
cm
Minimum
19.5
49.5
22.625
57.5
26.625
67.6
30.5
77.5
34.5
87.6
Maximum
22.375
56.8
27.75
70.5
31.625
80.3
35.625
90.5
39.5
100.3
• EHN408-0010 CPU cable to connect your PS/2 server to the ServTray.
Figure 2-2 shows the Rear Bracket Extension Kit, and Figure 2-3 shows the ServTray in its minimum and
maximum extension positions.
Figure 2-2. Rear Bracket Extension Kit.
Figure 2-3. The ServTray’s minimum and maximum depths.
19.5"D
(49.5 cm)
39.5"D
(100.3 cm)
Front
Front
Rear
Rear
(2) Rear
brackets
(2) Extensions
(2) End rails
