Product identification code
The table that follows gives the identification codes for the model series of the
CTR101 and CTR201 control system.
You can use the identification code to order the control system.
CTR101/CTR201 SERIES MODEL CODE
AAAAAA-BB-CCC-DDD-EE-FF
On-Demand Drive control-system series CTR101 and CTR201
AAAAAA: Control
system series
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
CTR101
●
CTR201
●
BB: Configuration
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
2WD
A1 : Single controller for 2WD
●
●
4WD
A2 : Dual controller for 4WD
●
●
CCC: Software
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
B00 : Standard software for CTR101
●
C00 : Standard software for CTR201
●
DDD: Supply kit
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
I10 : 10 m power / ISOBUS cable
with ISOBUS implement connector
and terminating bias circuit
●
P10 : 10 m power cable with free +/-
leads
●
EE: Options 1
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
H0 : default / not defined
●
●
FF: Options 2
AAAAAA-BB-CCC-DDD-EE-FF
CTR101
CTR201
C0 : default / not defined
●
●
Control system connections
Important notes
When you plan to use the CTR101/CTR201 control system, make sure that:
• The nominal operating voltage of the control system is 12 V. Do not connect the
system to a different voltage.
• The current requirement of the power supply of the system is 15 A. Make sure that
you always use a connection with a fuse.
• When the control device has no power, the system switches the motors to
freewheeling. Make sure that you can switch off the power supply to the control
device from the tractor's cab.
5.2
5.3
5.3.1
Control system
Product manual
19