Black Bull DP5UL Assembly & Operating Instructions Download

Page: 3 / 16

GENERAL PRODUCT SPECIFICATIONS

FEATURES:

• 5 Quick-Change Speed Settings
• Includes Laser Centering Device For Finding Exact Center
• Front Mounted Safety ON/OFF Switch
• Cast Iron Table, Base And Drill Body
• Table Tilts 0 - 90° Left & Right

SPECIFICATIONS

• Rated Current

2.5 AMP / 250 Watt

• Rated Voltage

120V / 60 Hz

• 5 Speeds

620, 1100, 1720, 2340, 3100 RPM

• Chuck Capacity

1/2"

•

Motor

1/4

• C UL US

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE. READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS

PRODUCT.

When unpacking, check to make sure all parts listed are included. If any parts are missing

or broken, please call Customer Service at 1-888-287-6981.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE

DP5UL 5 Speed Drill Press Assembly & Operating Instructions

Summary of Contents for DP5UL

















Search results

Summary of Contents for DP5UL

Reviews:

Related manuals for DP5UL

Brands by name

Popular brands

Black Bull DP5UL, Assembly & Operating Instructions

Search results

Summary of Contents for DP5UL

Reviews:

Related manuals for DP5UL

Brands by name

Popular brands