5
BATTERY REQUIREMENTS
FITTING THE BATTERIES
LOW BATTERY WARNING
Your Alarm requires 2 x LR03 AAA 1.5V alkaline batteries.
The use of good quality batteries is essential for maximum battery life.
To reduce the risk of battery leakage:
• DO NOT mix old and new batteries
• DO NOT mix diff erent battery types
• The use of rechargeable batteries is NOT recommended
Please ensure the batteries are removed from the Alarm during long periods without us
1. Turn off unit prior to fi tting or replacing batteries and remove the rodholder by turning the
rod fi xture against clockwise.
2. Using a screwdriver unscrew the two battery cover screws.
3. Lift the battery cover by the lifting tab (indicated with an arrow).
4. Take care removing any batteries already present. Insert new batteries and ensure correct polarity.
5. For best weatherproofi ng, ensure battery cover has a good seal by seating it in place applying
fi rm pressure.
6. Re-fi t cover and screws.
DO NOT over tighten the battery compartment screws, excessive force will damage the
screw threads.
As the batteries approach a depleted state and replacement is required, the Alarm LEDs will
“double fl ash” in the red colour every 60 seconds. Once the ‘Low Battery Warning’ has been
activated, batteries should be replaced immediately.
1
1
3
2
Summary of Contents for 6830001
Page 1: ......
Page 56: ...111 NOTES...
