IMPORTANT SAFETY INSTRUCTIONS
1.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE.
If you do not understand these instructions, need
clarification or further explanation, please call our toll free answer line for assistance at
1-800-304-1316
Monday through Friday 8:00 a.m. until 5:00 p.m. CST.
2.
Do not load Plastic Crate Cart with more than 1200 lbs. (544 kg)
3.
Do not allow children to use the cart unsupervised. This Plastic Crate Cart is not a toy.
4.
Always distribute payload evenly over surface of Crate.
5.
If any parts become damaged, broken, or misplaced, do not use the Cart until
replacement parts can be obtained.
6.
Do not operate or use on objects that can cause damage to the pneumatic tires or tubes.
Do not inflate tires more than 30 psi.
7.
SAVE THESE INSTRUCTIONS.
ASSEMBLY INSTRUCTIONS
Your Plastic Crate Cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts
are missing, damaged, or if you have questions or need additional instructions,
DO NOT RETURN THIS
PRODUCT TO THE RETAILER,
call the manufacturer at
1-800-304-1316
.
Tools required for assembly: Medium size slot screwdriver, 6, 8, and 12mm open end wrench and /or two medium
adjustable wrenches.
Refer to the exploded drawing and the parts list
on the following pages during assembly.
STEP 1
Assemble the Rear Axle Support to the
Frame Support using (4) 6 x 16mm Frame
Support Bolts and lock nuts. Tighten all
lock nuts securely.
STEP 2
The Front Axle Support is mostly
pre-assembled at the factory. Please make sure all
bolts and nuts assembled at the factory
are tight.
A. Insert the two remaining 8 x 15mm shoulder
bolts into each end of the Steering Link
Connector. Apply 6mm washers and lock nuts.
B. Attach the completed Front Axle Support to
the Frame Support using (4) 6 x 16mm frame
support bolts and lock nuts.
C. Secure the Center Front Axle Brace to the
Frame Support using 8 x 20mm bolts
and lock nuts.
