STEP 3
Attach the Frame Support to the Crate
using the (3) 8 x 45mm crate bolts, washers,
and lock nuts.
STEP 4
Install the Wheels in the
following order.
A.
Place the Wheel Spacer bushings
onto the axles.
B.
Place the Wheels onto the axles with the
valve stem facing out.
C.
Use the 12mm washers and then the
12mm lock nuts to secure the wheels.
Tighten Securely.
STEP 5
Attach the Tractor Pull Handle and the Plastic
Coupling using the 8 x 60mm pull handle bolt,
washer and lock nut.
