TROUBLESHOOTING
TROUBLE
POSSIBLE CAUSE
RECOMMENDED ACTION
Lift Cart Will Not Raise Up
1. Low oil level in tank
2. Air present in the hydraulic system
3. Pendulum Arm Nut is not
properly adjusted
1. Add hydraulic oil
2.Pump the handle quickly several times to
bleed air from the system
3. Adjust Pendulum Arm Screw
Lift Cart Will Not Lower
1. The fork is blocked
3. Pendulum Arm Nut is not
properly adjusted
1. Check and remove obstruction
3. Adjust Pendulum Arm Nut
Lift Cart Will Not Raise Up
To The Highest Level
1. Not enough oil in the tank
1. Add hydraulic oil
There Is No Difference In
Speed Between Release
Lever Position I and II
1. Pendulum Arm Nut is not adjusted
properly
1. Adjust Pendulum Arm Nut
C. Setting the Adjusting Screw on the Release Lever
•
To adjust the Release Lever (Part #106) into the (3)
positions properly, you can adjust the Screw (Part #187) to
alter the force of the Release Lever.
•
To prevent accidental touching of the Release Lever, you
can tighten the screw (Part #187).
3. HOW TO RELEASE AIR FROM THE PUMP
Loosen the Screw (Part #130) on the pump while
pushing the handle down slowly to release the excess air
from the pump. Retighten the screw once the air has
been removed.
4. ADDING OIL
If the Hydraulic Lift Cart can not be pumped up to its
highest position, you may need to add hydraulic oil to the
oil tank. The hydraulic fluid to be used must meet
ISO VG22 or equivalent. Mixing of different fluids is
prohibited.
•
Inspect the unit prior to each use.
•
Do not use if damaged or worn
excessively. Keep hands and feet
away from lift mechanism.
•
Do not move the unit when it is in
the raised position.
•
Always use on a flat, level surface.
•
Never lift or transport people.
•
Make sure load is safe and secure
prior to lifting or moving the unit.
•
Do not modify the hydraulic lift cart.
CAUTION
Read and understand
all warnings and
instructions prior to use.
WARNING
