Black+Decker BDCDS18, Manual

2

ENGLISH

(Original instructions)

3

ENGLISH

(Original instructions)

2

3

2

2a

11

10

Intended use

Your BLACK+DECKER BDCDS18 sander has been designed 

for sanding wood, metal, plastics and painted surfaces. This 

tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

@

Warning! Read all safety warnings and all 

instructions.

Failure to follow the warnings and 

instructions listed below may result in electric shock, 

fire and/or serious injur .

Save all warnings and instructions for future reference.

The term "power tool" in all of the warnings listed below refers 

to your mains operated (corded) power tool or battery oper-

ated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit.

Cluttered or dark 

areas invite accidents.

b.  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases 

or dust.

Power tools create sparks which may ignite the 

dust or fumes.

c. Keep children and bystanders away while operating a 

power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs 

with earthed (grounded) power tools.

Unmodified plugs

and matching outlets will reduce risk of electric shock.

b.  Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators.

There is an increased risk of electric shock 

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of 

electric shock.

d.  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts.

Damaged or entangled cords increase the risk of 

electric shock.

e. When operating a power tool outdoors, use an 

extension cord suitable for outdoor use.

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply.

Use of an RCD reduces the risk of 

electric shock.

10

11

4

G

H

G1