Black+Decker EVO185H2, Manual

4

ENGLISH

(Original instructions)

Intended use

Your Black + Decker multi-purpose tool has been designed for 

a wide range of DIY applications.

Using the hammer drill head (EHH183), this tool is intended 

for screwdriving applications and for drilling in wood, metal, 

plastics and soft masonry.

This tool is intended for consumer use only. Your Black + 

Decker charger has been designed for charging Black + 

Decker batteries of the type supplied with this tool.

Safety instructions

General power tool safety warnings

@

Warning! Read all safety warnings and all 

instructions. Failure to follow the warnings and 

instructions listed below may result in electric 

Save all warnings and instructions for future reference. 

The term "power tool" in the warnings refers to your mains 

operated (corded) power tool or battery operated (cordless) 

power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark 

areas invite accidents.

b.  Do not operate power tools in explosive atmospheres, 

or dust. Power tools create sparks which may ignite the 

dust or fumes.

c. Keep children and bystanders away while operating a 

power tool.  Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs 

with earthed (grounded) power tools. 

and matching outlets will reduce risk of electric shock.

b.  Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. There is an increased risk of electric shock 

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 

electric shock.

d.  Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts. Damaged or entangled cords increase the risk of 

electric shock.

e. When operating a power tool outdoors, use an 

Multi Tool

               EVO185

Voltage

V

18V(20V Max)

Hammer

EHH183

No-load speed       
Max. torque

            Nm

Chuck capacity

mm

10

Max Drilling capacity 

Charger

BDC2A                                             

Input Voltage

V

110                

Output Voltage               V

18

Current

2 A 

Approx. charge time

1 H     

Battery

LBXR2020  

Voltage

V

18V(20V Max)               

Capacity

 Ah

2.0    

Type

Li-lon     

EVO185H2
MULTI TOOL

Technical data