Black+Decker EVO185H2, Manual

9

ENGLISH

(Original instructions)

the speed selector (13) towards the rear of the tool (1st 

gear).

  For drilling in materials other than steel, slide the speed 

selector (13) towards the front of the tool (2nd gear).

BIT TIP STORAGE

A magnetic bit storage slot (4) is built into the area on the top 

of the tool.

LED WORK LIGHT

When drill is activated by pulling the trigger switch (1), the 

integrated LED work light (10) will automatically illuminate the 

work area. 

NOTE:

The work light is for lighting the immediate work 

Hints for optimum use

Drilling

  Always apply a light pressure in a straight line with the drill 

bit.

  Just before the drill tip breaks through the other side of the 

workpiece, decrease pressure on the tool.

  Use a block of wood to back up workpieces that may 

splinter.

  Use spade bits when drilling large diameter holes in wood.

  Use HSS drill bits when drilling in metal.

  Use masonry bits when drilling in soft masonry.

  Use a lubricant when drilling metals other than cast iron 

and brass.

  Make an indentation using a centre punch at the centre of 

the hole to be drilled in order to improve accuracy.

Screwdriving

  Always use the correct type and size of screwdriver bit.

amount of washing liquid or soap as a lubricant.

  Always hold the tool and screwdriver bit in a straight line 

with the screw.

Accessories

The performance of your tool depends on the accessory used. 

Black + Decker and Piranha accessories are engineered to 

high quality standards and designed to enhance the perfor-

mance of your tool. By using these accessories you will get 

the very best from your tool.

Maintenance

designed to operate over a long period of time with a minimum 

of maintenance.  Continuous satisfactory operation depends 

upon proper tool care and regular cleaning.

Warning!

cordless power tools:

  Or run the battery down completely if it is integral and then 

switch off.

  Unplug the charger before cleaning it. Your charger does 

not require any maintenance apart from regular cleaning.

charger using a soft brush or dry cloth.

  Regularly clean the motor housing using a damp cloth. Do 

not use any abrasive or solvent-based cleaner.

  Regularly open the chuck and tap it to remove any dust 

Protecting the environment

Z

Separate collection. This product must not be 

disposed of with normal household waste.

needs replacement, or if it is of no further use to you, do not 

dispose of it with household waste. Make this product avail-

able for separate collection.

z

Separate collection of used products and packag-

ing allows materials to be recycled and used again.  

Re-use of recycled materials helps prevent 

environmental pollution and reduces the demand 

for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or 

by the retailer when you purchase a new product.

Batteries

Z

Run the battery down completely, then remove it 

from the tool.

  NiCd, NiMH and Li-Ion batteries are recyclable. Take them 

to any authorised repair agent or a local recycling station.

Service Information

Black + Decker offers a full network of company-owned and 

authorized service locations throughout Asia.  All Black + 

Decker Service Centers are staffed with trained personnel 

service.Whether you need technical advice, repair, or genuine 

factory replacement parts, contact the Black + Decker location 

nearest to you.

Notes

• Black + Decker's policy is one of continuous improvement

to our products and, as such, we reserve the right to 

• Standard equipment and accessories may vary by