Black+Decker FX1073-B5, Original Instructions Manual

4

ENGLISH

(Original instructions)

In order to avoid a hazard due to inadvertent resetting of the 

thermal cut-out, this appliance must not be supplied through 

an external switching device, such as a timer, or connected 

to a circuit that is regularly switched on and off by the utility

Using your appliance

•  Always take care when using the appliance.
•  Misuse could cause injury.
•  Do not use the appliance outdoors.
•  Do not operate the appliance if your hands are wet. Do 

not operate the appliance if you are barefoot.

•  Guide the power supply cord neatly so it does not hang 

over  the  edge  of  a  work  top  and  cannot  be  caught 

accidentally or tripped over.

•  Be careful if hot liquid is poured into the food processor 

or blender as it can be ejected out of the appliance due 

to a sudden steaming. 

•  Keep loose clothing, hair, etc. away from moving parts.
•  Never pull the power supply cord to disconnect the plug 

from the socket. Keep the power supply cord away from 

heat, oil and sharp edges.

•  If  the  power  supply  cord  is  damaged  during  use, 

disconnect the appliance from the power supply

  immediately. Do not touch the power supply cord before 

disconnecting from the power supply.

•  Switch off the appliance and disconnect from the supply 

before changing accessories or approaching parts that 

move in use

•  Disconnect the appliance from the power supply when 

not  in  use  and  before  changing  accessories,  cleaning, 

etc.

•  Do not immerse the appliance, cord set or plug in water 

or any other liquids.

Note

: Do not run the appliance for more than 2 minutes , 

and wait for one minute or wait until the unit is cooled to 

room temperature before performing next operation cycle.

After use

•  Switch off, remove the plug from the socket and let the 

appliance  cool  down  before  leaving  it  unattended  and 

before changing, cleaning or inspecting any parts of the 

appliance.

•  When not in use, the appliance should be stored in a dry 

place.  Children  should  not  have  access  to  stored 

appliances.

Features

1.  Fine slicing disc (FX1075-B5 and FX1074-B5)

2.  Medium slicing disc

3.  Grating disc (FX1075-B5 and FX1074-B5)

4.  Fine shredding disc

5.  Coarse shredding disc (FX1075-B5)

6.  Disc holder

7.  Emulsifying disc

8.  Kneading blade 

9.  Protective cover for chopping blade

10. Chopping blade

(2 blade for FX1075-B5 and  1 blade for FX1074-B5 and 

FX1073-B5)

11.  Pusher 

12.  Feeding chute 

13.  Food processor bowl cover

14.  Measuring cup 

15.  Blender jar cover 

16.  Blender jar

17.  Drive shaft

18.  Food processor bowl

19. Safety lock

20.  Control knob

21.  Grinder (FX1075-B5)

22. Motor unit

Before first use

Thoroughly clean the parts that come into contact with food 

before you use the appliance for the first time.

(see chapter ‘Cleaning and maintenance’). 

Using the appliance

General

The  appliance  is  equipped  with  a  built-in  safety  lock  that 

prevents  it  from  functioning  if  the  blender  jar  or  food 

processor bowl and its lid are not assembled properly.

Food processor

1.  Put the bowl on the motor unit (22) and turn it clockwise 

to fix it

Note

: The bowl is assembled correctly when the handle is 

directly above the closed lock symbol.

2.  Put the drive shaft with the desired accessory in the bowl 

(chopping blade, kneading accessory, emulsifying disc or 

the  disc  holder  with  one  of  the  discs).  See  the 

appropriate section below.

3.  When you use the chopping blade or the kneading disc, 

put the ingredients to be processed in the bowl.

Note

: Do not fill the bowl beyond the MAX indication

4.  Put  the  lid  on  the  bowl.  Turn  the  lid  clockwise  to  fix  it 

(‘click’)

Note

: Make sure the projection on the lid locks into the slot of 

the bowl handle