Black Diamond Equipment BLD-DVC6500, Owner'S Manual

28

Normal timer recording

■

For timer recordings, clock, date, and stations must be set correctly. 

■

Load a cassette with its safety tab in place and with sufficient free space for the recording.

Call the player’s "SETUP", choose "TIMER PROGRAM".
Decide if you want to record  "ONCE", "WEEKLY" or
"DAILY"...
... and confirm.

1

Type in one after the other: 
•  The programme location number;
•  the time the broadcast starts,
•  the time the broadcast ends, 
•  the day of the broadcast, if it is not today. 
•  Select LP if you wish to make a very long recording .

2

If you wish to make changes:
Move to the position you want to change using the  [< / >]
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
If all setting are ok, press [< or  >], till you see “OK :
CONFIRM” in the bottom line.
Confirm.

3

Switch your player off.

• Wait a few seconds after typing a one-digit-number.

• If you have made a mistake, move to the position you want to change using the [< / >]

buttons and change the setting.

• If programme timings overlap, the machine will give a warning message. If you don’t adjust

the times, the machine will record the first programme completely then continue with the
second one.

• If there is no sufficient free space for the recording on the cassette the video switches

automatically to “LP” for double recording capacity. 

• The recorder will eject cassettes which have the safety tab removed.

PR+/-:SELECT(AV)

0-9  :SETUP(PR)

</>:CORRECT   SETUP:END

PR

--

START TIME

--:--

END TIME

--:--

START DATE

--/--

TAPE SPEED

SP

TIMER  PROGRAM (ONCE)

PR

01

START TIME

18:10

END TIME

20:30

START DATE

20/06(FRI)

TAPE SPEED

LP

PR+/-:SELECT(AV)

0-9 : SETUP (PR)

</>:CORRECT
OK:CONFIRM           SETUP:END

TIMER  PROGRAM  (ONCE)

HOW OFTEN DO YOU WANT

TO RECORD THIS PROGRAM?

PR+/-:SELECT
OK:CONFIRM       SETUP:END

ONCE

WEEKLY(ONCE A WEEK)

DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)

VCR

Operation

29

Timer Recording

Timer Review – changing and erasing

Call the player’s "SETUP", 
choose "TIMER PROGRAM".

1

Select the programming to change or erase. 
If you want to erase this programming press
button  [0], confirm with OK.
If you wish to make changes:
Move to the position you want to change using the
[< , >] buttons.
Change the settings using the [PR +/–] or
[number]  buttons.
If all settings are ok, press [< or >], until you see
"OK: CONFIRM" in the bottom line. 
Confirm changes with [OK]. Exit the menus.

2

TIMER  PROGRAM

PR

START END

DATE

03  

21:20   22:20  14/06

01    18:10   20:30  20/06
--   

-- : --  

-- : --  -- / --   

--   

-- : --  

-- : --  -- / --

--   

-- : --  

-- : --  -- / --   

--   

-- : --  

-- : --  -- / --

--   

-- : --  

-- : --  -- / --

--   

-- : --  

-- : --  -- / --

PR+/-:SELECT
OK:CONFIRM         SETUP:END

TIMER  PROGRAM (ONCE)

PR

03

START TIME

21:20

END TIME

22:20

START DATE

14/06(SAT)

TAPE SPEED

SP

0 :ERASE

</>:CORRECT   SETUP:END

Timer Recording