(
7) TRANSPORTATION
The machine must be sent with original packing the machine must be packaged with the corresponding ton-
nage Forklift loading and unloading,
the truck according to FIG position insert foot. (Figure 1)
。
(6) OPERATION SETTING
●
Pressure setting: the machine to work properly due within 7-10bar pressure range, so coherent
supply pressure should reach 7bar above.
●
Fuel settings: lubricator oil and fuel is calibrated at the factory , if the fuel goes in too fast or too
slow, use a screwdriver to adjust the oil mist on the needle, and then step on the foot pedal
pressure tire 5 to 10 times .If the lubricator drops a drop of oil , it meets the requirement. Re-
member to regularly refil 32 # hydraulic oil to the oil cup (2/3 cup)
(8) UNPACKING THE MACHINE
After removing the packaging, the machine and its components visually visible damage check, if in doubt
please contact your dealer. Package materials such as plastics, polystyrene, nails, screws, wood,
cartons and other waste must be placed in a box, according to local regulations. Please check the box that
comes consistent with the packing list when unpacking.
Note: When disassembling the machine must wear gloves to avoid
contact with the packaging material and scratch or galling.
Before Usage
We strongly suggest installing on the ground to ensure the performance of
the machines
Outside clamping
10”~22”
10”~24”
Inside clamping
12”~24”
12”~26”
Max. wheel width
14”
14”
Max. wheel diameter
960mm
1080mm
Working air pressure
8~10bar
8~10bar
Bead breaker force (at
8bar)
2500kgf
2500kgf
Motor speed /
Operating speed
1 speed / 6r.p.m
1 speed / 6r.p.m
Shipping weight
350kg
350kg
Motor power
0.75~1.1kw
0.75~1.1kw
(5) SPECIFICATION
Summary of Contents for TC1024DCA
Page 1: ...TC1024DCA Tire Changer ...
Page 8: ......
Page 11: ...Installation of assist arm Follow the picture to connect the nut and screw ...
Page 19: ...13 Diagram 110V 220V 380V ...