DORNIER DO335. Item code: BH163
11
3mm Washer
- - - - - - - 8
3 x 15mm Cap Screw
- - - - - - - 8
3 x 12mm Tp Screw
- - - - - - 7
3mm Spring Washer
- - - - - - - 8
INSTALLING THE ELECTRIC MOTOR, COWLING
3mm
Washer
3x15mm
Cap Screw
3mm
Spring Washer
3)
Slide the cowl back over the motor and secure it in place using three
wood screws. See picture below.
4)
Drill three 2.5mm pilot holes through both side of the cowl and the side
edges of the firewall. Using a 3mm drill bit, enlarge the three holes in the
cowling.
2)
While keeping the back edge of the cowl flush with the marks, align the front of the cowl with the crankshaft of the
motor. The front of the cowl should be positioned so the crankshaft is in
nearly
the middle of the cowl opening. Hold the
cowl firmly in place using pieces of masking tape.
1)
Slide the fiberglass cowl over the motor and line up the back edge of the cowl with the marks you made on the
fuselage.
Top View
Summary of Contents for BH163
