13
AIR OUTLET
Pic. 6
Note: This inflator has been supplied with no
adjustable regulator and gauge.
Different air tools require different operating
pressures. Always check with the tool
manufacturer if unsure.
This compressor only has 8Bar pressure. If you
require adjustable pressure you will need to buy a
regulator.
IMPORTANT
NOTE
This inflator has been supplied with no
adjustable regulator and gauge.
Outlet pressure is 8 Bar (115 PSI).
If you require a lower pressure for your air
tool please buy an adjustable regulator and
gauge from your stockist.
PIC. 6
PIC. 7
Tank
pressure
gauge
Pull to
check
operation
Nitto style
outlet
socket
SAFETY VALVE
Pic. 7
NOTE: When checking the safety valve ALWAYS
wear safety glasses.
To check the operation of the safety valve the
air tank will need to be full. Gently pull the ring
outwards. This should release air under pressure.
Release the ring and this should stop the air out
flow once the pressure has dropped.
If the safety valve does NOT work in this manner,
STOP the inflator immediately and have the
inflator checked / serviced by an authorised
service centre.
