7
WARNING
Only use inflator when fully assembled.
Do not attempt to modify the inflator in any way; this will VOID your warranty.
The use of any attachment or accessory other than those recommended in this instruction manual
could result in damage to the inflator and could cause injuries to the operator.
This electric inflator complies with Australian / New Zealand and International standards and safety
requirements. Repairs should only be carried out by qualified persons using original spare parts.
Failure to do so may result in considerable danger to the operator.
PERSONAL SAFETY
Clothing
Do not wear loose clothing, jewellery or anything
that could get caught in moving machinery.
Hair
Long hair should be tied back or contained in a
protective covering.
Eye Protection
The use of safety goggles is highly recommended
(normal glasses are not sufficient for eye
protection) when using inflator. Prescription
glasses do not have safety lenses.
Footwear
Where there is the risk of heavy objects or if
there is a risk of slipping on wet or slippery floors,
suitable non–slip safety footwear should be worn.
Protect your feet from dropping accidents.
Ear Protection
The use of ear protection is highly recommended
when using inflators. The continual noise may
damage your ears.
Respiratory Protection
When operating any machinery that creates dust
or when spray painting, an approved dust / filter
mask must be worn. When machining concrete,
man made fibres, especially MDF (Medium Density
Fibre board), the resin used in these materials can
be hazardous to your health. Use an approved
face mask with replaceable filter.
Do Not Over Reach
Do not over reach. Keep a proper footing and
maintain your balance at all times. Avoid using
abnormal stances and awkward body positions.
Stay Alert
Watch what you are doing, use common sense,
and never operate a inflator when you are
tired, drinking alcohol, taking drugs or if taking
medication that causes drowsiness.
CHECK DAMAGED PARTS
Before using the inflator it should be carefully
checked to determine that it will operate properly
and perform its intended function.
Check for the correct alignment of moving
parts ensuring that they do not bind. Check for
broken or missing parts and have them replaced
or repaired at an authorised service facility.
Check any other condition that may affect the
operation of the inflator. A guard or any other
part of the inflator that is damaged should be
properly repaired or replaced by an authorised
service facility unless otherwise indicated in this
instruction manual.
Any switch that does not operate correctly must
be replaced by an authorised service facility.
DO NOT use the inflator if the ‘ON / OFF’ button
does not turn the inflator ‘ON’ and ‘OFF’.
