8
SPECIFIC SAFETY
INSTRUCTIONS
Warning! Do not use the inflator in areas
where there is a risk of explosion or fire from
combustible materials. The sparks generated
from certain tools attached to inflator can ignite
combustible materials as well as flammable
liquids, paint, varnish, petrol, flammable gases
and dust of an explosive nature. As a precaution
it is recommended that you consult an expert on a
suitable fire extinguisher and its use.
• Do not attempt to modify the inflator,
guards or the supplied accessories in any
way.
• Domestic inflators are designed for
intermittent operation. Ideally a 50% duty
cycle. (Meaning. 30 seconds ON motor
pumping and 30 seconds OFF, motor not
pumping). When the motor is pumping
the attached air tool can not be used. Only
use the attached air tool while the inflator
is not pumping.
• Stop using the attached tool as soon as the
inflator starts pumping.
• Fully assemble inflator before use.
• Always ensure your inflator is level and
stable.
• Never use an extension cord with this
inflator always use a longer air hose.
• Never connect to a generator which does
not produce sufficient power, at least
1500W and has pure sine wave power
output.
• Domestic inflators are not designed for
industrial / commercial applications.
• Domestic inflators are not designed for
continuous running.
• Avoid touching the pump area as it can become
very hot and may burn.
• Ensure that the inflator is disconnected from
the mains supply when not in use, before
servicing, making changes and when changing
attachments such as air hoses / tools.
• Always use the correct type of tool for the
operation to be carried out.
• Never use the inflator if any part of the unit is
damaged. Always have the inflator serviced by
an authorised service agent.
• Always wear safety eye, ear and respiratory
protection when operating the inflator.
• Allow the tank to completely fill before using
the inflator.
• If the inflator makes an unfamiliar sound or
vibrates excessively, switch the inflator ‘OFF’
immediately and disconnect from the mains
power supply. Investigate the possible cause or
consult your authorised service facility.
• Always move the inflator using the handle and
wheels.
• Always use the inflator on stable ground.
• This inflator is designed to compress normal air.
Never use to compress any other type (s) of
gases.
• Never direct the jet of air or other liquids /
gases towards your body, other persons or
animals.
• Never direct the jet of air or other liquids /
gases towards this inflator.
• This inflator is not suitable for pharmaceutical,
food or sanitary purposes.
• This inflator is not to be used to for filling scuba
or oxygen air bottles or tanks.
• Always follow the instructions relating to the
tools attached to this inflator.
IMPORTANT
ELECTRICAL DATA
This inflator is fitted with a sealed electrical connection plug that is compatible with the mains
power supply for Australia / New Zealand and meets the requirements of Australian Standards. This
inflator must be connected to a supply voltage that is equal to that stated on the rating label. If the
mains power connection plug or power cord becomes damaged it must be replaced with a complete
assembly that is identical to the original, and this must be replaced by an authorised service centre.
Always follow the Australian / New Zealand requirements for connection to the mains supply. If in
doubt always consult a qualified electrician.
