STEP 01
In order for the
igniter switch to work prop-
erly, please make sure battery is
correctly installed.
STEP 02
Turn OFF gas burner
control knobs.
!
WA R N I N G
Do not lean over griddle
while lighting.
!
WA R N I N G
If ignition does NOT occur in 5
seconds, turn burner controls
OFF, wait 5 minutes and repeat
lighting procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner and could
accidentally/inadvertently ignite
with risk of injury.
STEP 03
Turn gas ON at LP
cylinder by taking 20 seconds to
turn knob halfway.
STEP 04
To ignite, push and turn
IGNITION BURNER knob to MAX.
STEP 05
Push and hold
ELECTRONIC IGNITION button
until IGNITION BURNER lights.
STEP 06
To ignite remaining
burners, turn each burner knob
in sequence to MAX position.
Start with burner closest to
IGNITION NEEDLE.
IGNITION |
BATTERY POWERED
GRIDDLE OPERATING INSTRUCTIONS
For proper ignition and operation of the griddle follow the steps below.
Ignition | Battery Powered
Battery Powered | Ignition
Model 1868
| Owner’s Manual |
| Owner’s Manual |
Model 1868
32
33
Summary of Contents for 1868
