Black Stone Culinary Pro 1902 Owner'S Manual Download

Page: 37 / 44

ENG

LIS

ENG

LIS

Owner’s Manual

blackstoneproducts/support.com

ENG

LIS

Section 03

GRIDDLE SEASONING INSTRUCTIONS

For best results, we recommended seasoning the griddle before cooking

on griddle top.

STEP 01

Make sure griddle top

is wiped clean of debris. (For first

time cleaning, please reference the

Cleaning Your Griddle Top section.)

Blackstone griddle tops are pre-treated

with soy oil as a protective coating.

This coating may leave a discoloration

on the griddle top. This is normal and

will not affect the seasoning process.

STEP 02

Set your griddle to high

heat until your griddle top changes

color. Use tongs to hold a paper

towel or cotton cloth and spread 2-3

tablespoons of your seasoning oil

across the griddle surface.

When seasoning your griddle top,

remember to use a thin and even layer

of oil—the thinner the layer of oil, the

easier it will be to burn it off.

STEP 03

You will know it is done

when it stops smoking. You will

want to repeat this 3-4 times for

your initial seasoning.

The heat of the griddle will break

down the oil and bond it to the metal,

creating a new polymer that acts as a

stick resistant and protective layer over

the griddle.

TOOLS

NEEDED:

Cooking tongs,

Paper towels, and Cooking oil

PLEASE NOTE:

Small variations in manu-

facturing and raw materials can cause some

griddles to be slightly warped. A slight warp

will disappear when the griddle is heated in

preparation for cooking.

VIDEO TUTORIAL

How to Season a New Blackstone

Griddle | Blackstone Griddle

youtube.com/

watch?v=VspmDVnj2pI&t=3s

Care & Maintenance

ENG

LIS

C AU T I O N

Customers in humid or

coastal climates

may

require more frequent

seasonings and the use of

heavier cooking oils to avoid

rusting and corrosion.

WHY DO I NEED TO

SEASON MY GRIDDLE?

Seasoning leaves a hard protective

layer bonded to the steel surface.

• Natural stick resistance.
• Prevents rust and corrosion.

WHAT OIL IS BEST TO

USE?

The

Blackstone Seasoning and

Cast Iron Conditioner

is the best

and easiest way to get consistent

results. This unique blend of oils

combines the best of many different

cooking oils.

Can I use any food grade oil?

Yes, but different oils can vary in the

process from the burn time, smoke

point, and durability once finished.

If you prefer to use an animal fat for

seasoning, only use rendered fat (pure

tallow, schmaltz, etc.) with no additives.

SYMPTOMS

01. After seasoning, the griddle surface is not black.

02. Food is sticking to the griddle surface.

POSSIBLE CAUSES

SOLUTION

01. Too much oil was used.

02. You turned off the heat too soon.

First, turn your griddle on high and let it

heat for 10-15 minutes.
Next, scrape off as much of the thick-

ened and partially cooked oil as you can.

Then, re-season with a very thin layer

of oil.

POSSIBLE CAUSES

SOLUTION

01. The corners and edges do not have

the same access to the direct heat

of the burners, making it harder for

the seasoning to darken like the

rest of the griddle top.

Apply a thin layer of oil between cooks

to maintain seasoned cooking surface.

(Please reference the Cleaning your

Griddle Top section.)

After using your griddle for multiple

cooks, the seasoning will even out and

improve.

GRIDDLE SEASONING TROUBLESHOOTING

SYMPTOMS

01. After seasoning, there is a brownish residue on the griddle surface.

For further troubleshooting,

please reference the

Troubleshooting chapter.
For Frequently asked questions, visit

blackstoneproducts.com/faq

Care & Maintenance

Model 1902

Summary of Contents for Culinary Pro 1902













































Search results

Summary of Contents for Culinary Pro 1902

Reviews:

Related manuals for Culinary Pro 1902

Brands by name

Popular brands

Black Stone Culinary Pro 1902, Owner'S Manual

Search results

Summary of Contents for Culinary Pro 1902

Reviews:

Related manuals for Culinary Pro 1902

Brands by name

Popular brands