REMOTE ENGINE SHUTDOWN
If the vehicle has been remotely started and
you desire to turn the vehicle off, simply
press button 2 on the remote transmitter.
After the motor has turned off the doors will
relock (optional).
AUTO COLD START
Cold start feature allows the remote starter
to start and run the vehicle every one or two
hours (selectable by your installer) for a
period of 24 hours.This allows the engine to
remain at an operational temperature in
extremely cold weather. Auto Cold Start must
be enabled during installation or it cannot be
engaged.
Engaging the Auto Cold Start feature:
To turn Auto Cold Start on:
While holding the brake pedal down, push
the program switch and transmitter button 2
for two seconds.
• The parking lights will flash three times.
• The siren will chirp three times.
• The engine will start and run for thirty
seconds to indicate the Cold Start
feature is engaged.
Disengaging the Auto Cold Start feature:
The Auto Cold Start feature can be
deactivated in one of three ways:
• Press the brake pedal.
• Turn on the ignition.
• Remote start the vehicle using the
transmitter.
STOP AND GO
The Stop and Go feature allows the vehicle
to remain running without use of the ignition
key during short stops.
To activate the Stop and Go feature:
1. Press and hold the brake pedal.
2. While pressing the brake pedal, push
transmitter button 1.
• The LED will flash rapidly.
• The parking lights will flash four
times.
3. Release the brake pedal.
4. Remove the key from the ignition
switch.
5. Exit the vehicle and lock the doors
manually or using transmitter button 1*.
To resume driver control:
1. Unlock the doors manually or by press-
ing transmitter button 1.*
2. Turn on the ignition.
3. Press the brake pedal.
• The vehicle resumes driver control.
• The LED will turn off.
*
If optional keyless entry feature is installed.
SAFETY FEATURES
The system will not start the vehicle if the
brake pedal is pressed or the hood is open.
Also, if the brake is pressed or the hood is
opened while remote running, the remote
start will shut down.
REPLACING LOST OR STOLEN
REMOTE TRANSMITTERS
The system can “learn” a maximum of 2 LCD
transmitters.To add a transmitter or replace
lost/stolen transmitters, please consult with
an authorized dealer.
3
