6
FIGURE 1. OPTIONAL VACUUM
SYSTEM HOOK-UP
VACUUM
SWITCH
EXISTING CAR
VACUUM HOSE
YELLOW
GROUND
EXISTING CAR
VACUUM HOSE
For vacuum switch hook-up dip switch #2=OFF
COLD START ACTIVATION
(Keyless Entry/Remote Start module only
)
Automatically starts engine every 2 hrs. for 24 hrs. max.
Hold both program switch and button #2 for 5 seconds,
parking lights will flash 5 times and remain on. Engine will
start and run for 30 seconds to confirm activation.
Once activated the engine will start up automatically
and run for a preset period of time.
COLD START DEACTIVATION
(Keyless Entry/Remote Start module only
)
Hold both program switch and button #2 for 5 seconds,
parking lights will flash 10 times to confirm deactivation.
You may also deactivate the Cold Start feature by stepping
on the brake pedal at any time or turning ON the ignition.
OR...remote start the vehicle.
WIRING HARNESS
RED
YELLOW
IGNITION #1 OUTPUT
BROWN
IGNITION #2 OUTPUT
RED
CONNECT DIRECTLY
TO THE BATTERY
GREEN
SPARK OR TACH SENSE (-)
VIOLET
NOT USED
BLACK
GROUND INPUT
ORANGE
ALARM AUXILIARY INPUT (-)
WHITE
PARKING LIGHT OUTPUT (+)
RED
+12V INPUT
SWITCH
HOOD SWITCH INPUT(-)
BLUE
BROWN
NOT USED
GRAY
REMOTE START OUTPUT (-)
VIOLET
STARTER OUTPUT
ORANGE
ACCESSORY OUTPUT
YELLOW
(+) BRAKE SWITCH INPUT
BLUE
GREEN
RED
DOOR LOCK OUTPUT (-)
+12V CONSTANT OUTPUT
DOOR UNLOCK OUTPUT (-)
#1
#2
#3
#4
DIP SWITCH SETTINGS
Default settings from
factory are= ON
1. OFF= Reads GREEN tach/spark sense wire.
2. OFF= Reads YELLOW wire (3-pin accessory plug)
for optional vacuum kit
3. OFF= Extend cranking time; will auto adjust.
4. OFF= Diesel – ignition will turn ON several
seconds before starting vehicle.
CONNECTORS
PROGRAM
SWITCH
#5
#6
YELLOW
GREEN/BLACK
RED
TRUNK OUTPUT (-)
FACTORY DISARM OUTPUT (-)
VACUUM SWITCH INPUT
ACCESSORY
PLUG
DOOR LOCK
PLUG
EXTERNAL
RECEIVER
PLUG
1 2 3 4
LED
RED
BLACK
WHITE
SECURITY/REMOTE START WIRING DIAGRAM
