Page 11 of 17
11. Re-engage the clutch by moving the clutch handle to the engaged position (see image below)
⚠
WARNING
Do not allow anyone to stand near the rope or in line with the rope behind the winch while it is under
power. If the rope should slip or break, it can suddenly whip back towards the winch, causing a
hazard for anyone in the area. Stand far to the side while winching.
12. Attach the wired remote controller to the socket on the solenoid assembly. (see image below).
13. Operate the controls briefly to ensure they work properly. If operation is reversed, the power
cables may be connected backwards. Correct any such issue before use.
Rev. 032521 DiscountRamps.com 1-888-651-3431 Page 11
