Installation and User’s Guide
Customizing your handheld’s options — Handheld options
180
Storage Mode
If you are not going to use your handheld for an extended period of
time (more than two weeks), you should put it into storage mode.
Putting the handheld into storage mode is different than just
turning it off and as a result, the current date and time and the
encryption keys are lost.
1.
In the
Home
screen, scroll to the
OPTIONS
icon and click.
2.
In the
Device Options
screen, scroll to Storage Mode and click.
The following message appears: “Storage mode powers off
device to save battery life. Continue?” Scroll to Yes and click.
3.
The following message appears: “Entering storage mode will
lose current time. Continue?” Scroll to Yes and click.
To activate your handheld again, insert it into the charging cradle,
connect the cradle to a power outlet, and after a few moments the
Home
screen will appear.
Note
You can also activate the handheld from storage mode by
inserting a fine-tipped instrument such as a paperclip into
the reset hole located on the back of the handheld.Ensure
that the handheld is fully charged before you use it again.
See page 23 for more information on charging the
handheld.
Ensure that you set the date and time and generate new
encryption keys after you activate your handheld again. If
you do not generate new encryption keys, email redirection
will not occur. (See the Redirector Settings online help for
more information on generating encryption keys.) If you do
not set the date and time, messages will be stamped with
the date of January 1 and will be placed at the bottom of
your
Messages
screen. (See the Intellisync online help for
more information on updating the handheld’s date and time
automatically.)
