Installation and User’s Guide
Customizing your handheld’s options — Handheld options
176
•
Low - the LED will flash and the handheld will tone or
vibrate once every 15 minutes for 30 minutes
•
Medium - the LED will flash and the handheld will tone or
vibrate once every 10 minutes for an hour
•
High - the LED will flash and the handheld will tone or
vibrate once every 5 minutes for 2 hours
•
LED Only - the LED will flash for 15 minutes
•
Off - you will not be reminded.
Level 1 Notify Only:
Select whether or not you want to be notified
of all messages or only those with a level 1 priority. Choose from
either Yes or No.
Consider PIN Level 1:
Select whether or not you want PIN
messages to be considered level 1 priority. Choose from either Yes
or No. The default is Yes. If you set this field to Yes and have the
Level 1 Notify Only field set to Yes, you will be notified of Level 1
messages, PIN messages, and pending appointments only.
Note
If you have set your In Holster and Out of Holster
notification to None, the only reminder notification you will
receive will be the flashing LED. If you want Tone or Vibrate
reminder notification, you must change your regular
notification settings.
Note
You will always be notified of pending appointments with
reminders, even if you have turned off your handheld.
The priority of messages forwarded to your handheld is
dependent upon the filter rules set in the Desktop Manager.
You can create a new filter using the Redirector Settings’
tool to specify which messages should be forwarded with
Level 1 notification. See Chapter 3 or the Redirector
Settings online help for more information on filters.
