RIM Wireless Handheld — User’s Guide
Frequently asked questions — Resetting the handheld
130
other key functions.
•
Other punctuation marks are included in the symbols
library which you can open by pressing
ALT
+
SPACE
.
See
page 60 for information on inserting a symbol.
•
You can also insert international/accented characters into
your messages. When composing a message or entering
text, press and hold a letter key while rolling the
trackwheel to scroll through international characters/
accented characters. When the desired character appears,
release the letter key.
Resetting the handheld
On rare occasions, the handheld may report an internal handheld
error message, instructing you to press ‘R’ to reset. Doing so will
return the handheld to normal operation after a few minutes. Try
sending yourself a message and check that all the information has
been properly restored in the Status
screen.
There is also a reset hole located on the back of the handheld, below
the bottom label. Normally, you will not need to this method of
reset. However, if the handheld ‘locks up’ (no longer responds
when you press keys or use the trackwheel) you can use this
method to reset the handheld. A fine-tipped instrument, such as a
paper clip, can be inserted into this hole to press the reset button,
restarting and restoring the handheld to normal operation.
