13
SOURCE SWITCHING
This system supports both Manual Switching Mode and Auto Switching Mode.
•
When in Manual Switching Mode, momentarily press the SELECT button
on the front panel to switch between the two inputs.
•
Press and hold the SELECT button on the front panel for 3 seconds to
toggle between Manual Switching Mode and Auto Switching Mode.
When Auto Switching Mode is enabled, the system will switch inputs according
to the following rules:
•
When first powered on, the system with switch to the lowest numbered
active input.
•
When a new input is detected, the system will automatically switch to
that input.
•
When the selected input is removed, either by unplugging or powering
off, the system will switch to the lowest numbered active input.
•
The system remembers the last configuration used before losing power
or rebooting. If the system was in Auto Switching Mode, it will restart in
Auto Switching Mode. If the last selected input is active, the system will
switch to that input. Otherwise, the system will switch to the lowest
numbered active input.
•
When changing from Auto Switching Mode to Manual Switching Mode,
the system will not switch the currently selected input.
