W
I R E L E S S
L
A U N D R Y
M
A C H I N E
I
N T E R F A C E
I
N S T A L L A T I O N
Laundry Installation and Setup Guide
23
W
I R E L E S S
L
A U N D R Y
M
A C H I N E
I
N T E R F A C E
I
N S T A L L A T I O N
W
I R E L E S S
L
A U N D R Y
M
A C H I N E
I
N T E R F A C E
I
N S TA L L A T I O N
A wireless laundry center can support up to 60 laundry machines (see
on page 7). The configuration uses a
Wireless Bridges (LE3/BRIDGE) to connect to the LC3000 Reader and Laundry Wireless Interface (LWI30XX) installed
in each laundry machine. THe LE3/BRIDGE and LWI30XX communicate over an RF radio link, eliminating the need for
wiring between the reader and laundry machines. The Wireless Laundry System components are listed and explained
below.
Wireless Bridge (LE3/BRIDGE)
An LE3/BRIDGE includes a Wireless Interface Module, an enclosure, and a cable, as shown in
. The Bridge
accepts commands from the LC3000 over RS-485 and communicates to LWI30XXs installed in the laundry machines.
Laundry Wireless Interface (LWI30xx)
An LWI30XX includes a Wireless Interface
Module and a wiring harness (see
Wireless Interface Module and Wiring
Harness
(page 24). The wiring harness
connects the Wireless Interface Module to the
control board of the laundry machine. Before
your installation, select the appropriate
LWI30XX model number based on the
manufacturer and model number of each
laundry machine (see
Figure 16: Wireless Bridge component (LE3/BRIDGE)
