R
E A D E R
M
O U N T I N G
403-003-000 R
EV
A
1-8
R
EADER
M
OUNTING
The WR5000 is designed to mount to a single gang-box. Each reader ships with a hardware kit that
includes screws and two mounting brackets. The mounting brackets are similar except for the height of the
four ramped hooks which position the reader against the wall. The brackets are marked to show orientation
and application.
To mount the reader
1
Use the bracket marked OLD WORK when the gang-box has tabs on the outside of the wall. Use the
bracket marked FLUSH MOUNT when the gang-box is recessed or flush with wall (see:
Figure 1-4
).
Figure 1-4 Flush Mount & Old Work
2
Choose the correct bracket for your application, and then install the bracket onto the gang-box using
the two truss-head screws provided in the hardware kit.
Be sure to orientate the bracket with the TOP marking as shown in
Figure 1-5
.
Figure 1-5 Flush Mount Installation With Bracket
FLUSH MOUNT
OLD WORK
Tabs
TOP marking
Ramp Hooks
