7” Video Screen Manual v1.1 Dec 2015
8
4.1 Connect Speakers
The 7VS is supplied with 2 x stereo speakers; these are connected
on the underside of the device to the far right, as displayed below;
4.2 Connect Buttons
If you wish to use button activated content then attach the
required amount of buttons using the button wires supplied to the
appropriate button inputs as displayed below;
4.3 Insert SD Card
See ‘Programming Instructions’ for information on how to program
your SD Card. Once programmed place it face down in the slot
located on the left of the 7VS as displayed below;
