blackbox-av Director DVR Programming Manual Download | Manualshive

Page: 22 / 24

background image

20

SPECIFICATIONS

Video Input -

PAL Composite video 1V / 75 ohms via Phono / Scart connectors
(internally linked).

Audio Input -

Stereo 0.7V rms / 22K ohms via Phono / Scart connectors (internally
linked).

Rear audio record level control.

Video Output -

PAL Composite video 1V / 75 ohms via Phono /Scart connectors
(internally linked).

RGB Output -

Analogue 0.7V / 75 OHMS - sync on RGB - via Scart connector.

Audio Output -

Stereo 0.7V rms via Phono / Scart connectors (internally connected).

Compression method -

wavelet compression, constant frame size (128KBytes/frame)

Record capacity with standard 40GBt hard drive -

> 3 hours 20 mins (normal play)

> 6 hours 40 mins (long-play)

Record capacity with optional 80GBt hard drive -

> 6 hours 40 mins (normal play)

> 13 hours 20 mins (long-play)

Wired remote control for manual operation. (Via 7-Pin Din socket).
Wired 8-button sequence selector for automatic operation (via 7-Pin Din socket).

RS232 interface via 9-pin D plug for computer control and sequence programming.

RS485 bus via screw terminal and 7-Pin Din socket for peripheral control.

Built-In real time clock/calendar.

Front panel display -

2 * 16 character backlit alpha/numeric display.
Indicates current operating mode or time/date.

Dimensions

1U 19" rack mountable steel case. (483mm x 44.5mm x 312mm no allowance for cabling)

Power Consumption -

230v a/c mains 30Watt

«
...
20
21
22
23
24
»

Summary of Contents for Director DVR

























Reviews:

No comments

Related manuals for Director DVR

Brand: Pace Pages: 2

Brand: SAFE-TECH Pages: 16

RoadRecorder 9000

Brand: Safety Vision Pages: 25

Brand: Lorex Pages: 96

Brand: TeVii Pages: 23

Brand: Jesmay Electronics Pages: 13

Brand: 247Security Pages: 53

Brand: Eclipse Security Pages: 95

Brand: Vegiga Pages: 16

Brand: Veilux Pages: 148

Brand: American Dynamics Pages: 6

Brand: American Dynamics Pages: 60

Brand: Chinavision Pages: 7

Brand: Velleman Pages: 41

Brand: GE Interlogix Pages: 16

Brand: WatchNet Pages: 2

Brand: HIKVISION Pages: 121

Brand: HIKVISION Pages: 214

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands