4
Programmable Buttons
Your agent can set a programmable button to a shortcut button for a function or channel or call group in
accordance with the duration for which the button is pressed:
• Press: means pressing a button and immediately releasing the button.
Note: This radio can’t press and hold the buttons to change the function.
Assignable radio Functions
• Emergency call: initiates or cancels an emergency alarm or call.
• Monitoring: monitors any activities in a selected analog channel.
• One-press call: initiates a predefined private call, group call, or short message by pressing one button.
• Scanning: enables or disables scanning.
• VOX: enables or disables the VOX function.
• Zone: changes the current zone of the radio. This radio has 2 groups.
• Power level: switches between transmitting power levels.
• Kill / Stun: Remote to close and forbid the radio.
• Revive: Remote to open and revive the radio.
• Remote Monitor: Remote to monitor the radio
• Talk around: Turn ON / OFF this function.
• Radio check : Check whether the target radio is in the working state.
PTT Button
Each channel can be configured as a digital channel.
• During a call, if you press the PTT button, the radio transmits signals to other radios in the call. Press and hold the
PTT button to talk. Release the PTT button to listen to other members in the call. When you press the PTT button, the
microphone is activated.
• If there is no existing call, you can press the PTT button to initiate a call (for details, refer to the Initiate a Call
section). If the call admission tone function is activated, wait until the short prompt tone ends.
• During a call, if the "idle channel prompt" function is enabled (preprogrammed by your agent), when the target
radio (that receives your call) releases the PTT button, you will hear a short prompt tone, indicating that the channel
becomes idle, and you can respond.
• If the existing call is interrupted (for example, when you receive an emergency call), you will hear an idle channel
prompt tone. You can disable the "idle channel prompt" function by disabling the tone/prompt function (for details,
refer to the Enable or Disable the Tone/Prompt Function section).
• To switch between digital channels, turn the knob.
Status Indicators
You can learn about radio operation through the following:
LED indicator.
Prompt tone.
