STAT-4, STAT-8, AND STAT-24
26
1. Main Menu
Purpose:
Select the configuration task.
Table 3-4. Configuration description via the main menu.
Code
Item
Description
1
SYSTEM CONFIGURATION
Used for selection of system-wide parameters
(see
Section 3.8.2
):
- Select X-ON and X-OFF flow control characters.
- Change password.
- Prepare remote stat mux configuration.
2
CONFIGURE LOCAL CHANNELS
Used to select local sub-channel parameters
(see
Section 3.8.2
). Always change the parameters of
the command sub-channel as the last item.
3
DISPLAY LOCAL CHANNELS
Used to display information regarding local stat mux
CONFIGURATION
configuration. For Stat-24, the information appears
on three consecutive screens.
4
DIAGNOSTICS
Used to control the various test loops that can be
controlled by the stat mux (
Section 5.2
).
Q
EXIT TO NORMAL OPERATION
Ends the current configuration session.
Procedure:
To select a configuration task, type the corresponding code number. The stat mux will switch to the
corresponding screen. To end the configuration session, type
Q
. The TEST indicator will turn off, and you will
receive the message:
EXIT COMMAND MODE
STM IS IN NORMAL MODE
