SC-8 User Manual v1.3 June 2017
14
Put in the down (on) position to place the SC-8 in compatibility
mode for the LCD display and Button Pad add-on
(sold separately)
.
7 - Delay Range
The delay control allows you to determine how long between the
end of an audio file a new file can be activated. When switch 7 is in
the Up (off ) position, the control ranges from 0 - 60 seconds.
When switch 7 is in the Down (on) position, the delay control will
range from 0 - 4 minutes.
8 - Currently Unassigned on this Model
This will put the SC-8L into programming mode for the lighting
controller. However in the SC-8 the lighting simply turns on when
audio is being played and off when audio ends.
8 Button Mode
When all switches are in the Up (off ) Position, the SC-8 is in 8
button mode as standard, this means Button 1 plays file 1, and
Button 2 plays file 2 etc.
With switch 1 in the Up (off ) position files are interruptible, put
switch 1 in the Down (on) position to make playback
uninterruptible.
Sequential PIR mode
When switches 1 and 4 are in the Down (on) position the SC-8 will
be in Sequential PIR mode, this means it will activate one audio
track at a time via PIR sensor - moving onto the next audio track in
sequence after each activation.
This allows you to activate track 001 then 002 then 003 etc. one at a
time.
