background image

Do not discard electrical appliances with household waste.

CONGRATULATIONS ON YOUR PURCHASE OF OUR 

 

PRODUCT. 

This instruction manual is intended 

primarily  to  familiarise  the  operator  with  safety,  installation,  operation,  maintenance,  product  storage  and 

troubleshooting and it provides important information. So keep it well so that other users can 

 information in the future 

too. Due to the constant development and adaptation to the latest demanding EU standards, technical and optical changes 
can be made to the products without prior notice. Photos and drawings in this instruction manual may only be illustrative. 
Therefore, no legal claims related to this instruction manual, in particular any slight minor deviations from the information 
contained therein, can be applied if the product continues to meet all of the above mentioned 

 standards and 

declarations, and works as described. In case of confusion, contact the importer or retailer.

 Before the first operation, please read the owner’s manual carefully! 

The battery contains toxic substances.

Please dispose of batteries at your local battery disposal depot. 

IPX1

T3,15A

Do not store or use the battery in

locations where the temperature may reach or exceed 50°C!

Do not throw the battery into fire.

Do not throw the battery into water.

Do not throw the battery into household waste.

Summary of Contents for XW-2001















Reviews: