Cells 5
High-speed ba ery charger: XZ2150-2400KT
INPUT:
Rated voltage: 120 V~ , 50 Hz(AC)
Rated power consump
ti
ti
ti
ti
on: 65 W
OUTPUT:
Rated voltage: 21.5 V (DC)
Rated current: 2.4 A
Charging me: approx. 60 min.
Protec on class: II / (double insula on)
Noise emission value:
Noise measurement value determined in accordance with EN ISO 4817 The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
pA
=
71 dB(A) Uncertainty K: K
pA
= 5 dB
Sound power level: L
WA
=
82 dB(A) Uncertainty K: K
WA
= 5 dB
Vibr on emission value:
Total vibr on values (vector total of three dir
ons) determined in accordance with EN 62841:
Drilling in metal: Vibr on emission value
a
h,D
:
1.3m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
The vibr on level speci ed in these instru ons has been measured in accordance with the
standardised measuring procedure speci d and can be used to make equipment comparisons.
The speci
vibr on emission value can also be used to make an in al exposure e mate.
WARNING!
The vibr on level varies in accordance with the use of the power tool and may be higher than
the value speci
in these instruc ons in some cases. Regular use of the electric tool in such a
way may cause the user to undere mate the vibr on. Try to keep the vibr on loads as low as
possible. Measures to reduce the vibr on load are, e.g. wearing gloves and lim ng the working
e. Wherein all states of oper on must be included (e.g.
es when the power tool is
switched o and
ti
mes where the power tool is switched on but running without load).
WARNING!
Read all safety warnings designated by the
symbol and
all instru ons.
General Power Tool Safety Warnings