________________________________________PL10C / PL20B_____________________________________
9
IV) GENERAL DESCRIPTION
The electric hydraulic lift PL20 can be either placed on the floor or in a pit. It has been designed and
manufactured for lifting cars and holding them in elevated position.
The main parts of the lift are:
-
welded base
-
moving parts
-
lifting parts
-
control part
-
safety devices
- control cabinet (pump)
Figure 8
The PL10 set is composed of all these elements plus a pulling arm, a vertical extension, 4 anchoring clamps, 4 wheel
supports and various pulling accessories (clamp, chain, safety cable…).
It has been designed for lifting vehicles and keeping them at working height, securing them with the anchoring clamps and
straightening them.
.
Figure 9
- Control cabinet (pump): (Figure 10)
1 -
Descent button (remote control)
2 -
Lifting button (remote control)
3 -
Emergency stop (remote control)
4 -
Voltage monitoring lamp
5 -
Main switch
6 -
Safety signal (buzzer)
7 -
Lifting button (*)
8 -
Descent button (*)
Figure 10
NB : The buttons marked (*) do not function if the remote control is connected.
5
4
3
2
1
8 (*)
7 (*)
6
