STL3500
4
USE THE LIFT ONLY IF ALL THE SAFETY DEVICES ARE WORKING PROPERLY. IF THESE RULES ARE NOT
FOLLOWED, SERIOUS INJURY COULD BE CAUSED TO PEOPLE AS WELL AS IRREPARABLE DAMAGE TO THE
LIFT AND THE VEHICLE ON THE LIFT.
GENERAL PRECAUTIONS:
-
The operator is bound to follow the regulations which apply in the country in which this lift is installed.
In addition, the operator must:
-
Always work in the “OPERATOR AREA” as designated in the manual.
-
Never remove the protective guards or dismantle or shut down the mechanical, electrical or other types of
safety arrangements.
-
Read the safety regulations related to the lift and read the safety information provided in this manual.
The following terms have been used in this manual to describe the various types of risk:
DANGER
: there is a direct possibility of danger which could lead to serious injury or death.
WARNING
: indicates situations and/or actions which are unsafe and could lead to injuries of various types
except death.
CAUTION
: indicates situations and/or actions, which are unsafe and could lead to light injuries to persons and/or
damage to the lift, the vehicle and other properties.
RISK OF DAMAGE DUE TO ELECTRICITY
: special safety arrangements have been made on the lift
in places where the risks are very high.
RISK AND PROTECTIVE MEDIA
: the risk to which the operator is exposed when the vehicle is in a raised
position, together with the protective media which have been installed, in order to limit the possible dangers.
WARNING
Non suitable lighting may be risky. Ensure that all areas next to the lift are well lit in a uniform manner.
The vehicle must be placed on the lift in such a way that there is a uniform distribution of weight over the platforms.
To ensure the safety of persons and equipment, you must make sure that:
-
The “DANGER AREA” is kept under observation during the lifting process
Climbing on the platform when lifting the vehicle or when it has already been raised is strictly forbidden.
Do not move the vehicle when it is on the platform. The lift system can be removed when the lift is in the lowest
position and if it is not loaded.
