background image

8  

 

  

   

 

 

TABLE OF CONTENTS 

 

Specifications  ——————————————————   2 
Safety Precautions  ———————————————— 2 

Initial Setup  ———————————————————  3 

Control Panel Guide  ———————————————   3 

Operating Guidelines  ——————————————    4 

Care and Maintenance  —————————————-    4 

Basic Troubleshooting Guide  ————————–—-     6 

BlackJack SolderWerks 

BK3001LF  

Soldering Station 

(Compatible w/Lead-Free Solder) 

 
 

INSTRUCTION MANUAL 

 

 

Thank you for purchasing the BlackJack BK3001LF Soldering Station.  

Please read this manual before operating the equipment.   

Keep manual in accessible place for future reference.  

 

 

Summary of Contents for SolderWerks BK3001LF

Page 1: ...re and Maintenance 4 Basic Troubleshooting Guide 6 BlackJack SolderWerks BK3001LF Soldering Station Compatible w Lead Free Solder INSTRUCTION MANUAL Thank you for purchasing the BlackJack BK3001LF Soldering Station Please read this manual before operating the equipment Keep manual in accessible place for future reference ...

Page 2: ... not use the device near flammable materials Do not touch heated parts which may include tips nozzles barrels Disconnect from power source if the unit will not be used for a long periods Switch off power during short breaks Use only genuine replacement parts Soldering process produces smoke use on well ventilated place Do not try to alter or repair unit bring to qualified service center for repair...

Page 3: ...plug the soldering iron and reattach Soldering iron cord may be damaged or loose and needs to be replaced or repaired See trouble shooting soldering iron cords section of this manual PROBLEM 4 SOLDER WOULD NOT STICK TO THE SOLDERING TIP Description Soldering iron is able to quickly melt solder but cannot cause the solder to attach to the tip SOLUTION Soldering iron tip may already be too dirty or ...

Page 4: ...NANCE Changing TIP 1 Always turn the power OFF when removing or inserting a tip 2 When the tip is hot hold it with the heat resistant pad and pull it out 3 Insert the new tip fully into the handle If the tip is not fully in serted unit will produce three beeping sounds Checking Cleaning and Tinning the Tip 1 Set temperature to 250 C 482 F 2 After real temperature reaches the set temperature use a ...

Reviews: